How to make a mini basketball hoop in a few minutes
Posted June 15, 2018 09:20:51When you’re a basketball junkie, it can be hard to find the right hoop for your game.
For a few hours at least, it’s the same thing: you can’t find the perfect hoop.
That’s where a portable basketball can come in handy.
A portable basketball is a simple piece of plastic that you can carry around with you.
You put it in your shoe or pocket, and then it goes into the hoop.
It doesn’t require batteries, but it does use less space than traditional hoops.
It comes in three sizes: small, medium and large.
If you’re wondering what the difference is between a small and a medium, that’s a bit complicated.
Small is the size of your palm, while medium is for a larger hand, while large is for an average sized hand.
If you’re interested in making your own, here are some basic tips:1.
You need to know where the hoop is going to go.
That should be easy.
The hoop should be at least about 6 inches away from you.2.
The plastic that goes on the inside of the hoop must be completely flat and level.3.
If the hoop has an inside handle, it should have a point on the outside.
If it has a handle on the top, you’re fine.4.
There should be a rim on the bottom of the plastic.
If there isn’t, you need to use some kind of glue to attach the hoop to the plastic, as well as some kind that will hold it together.5.
When you attach the plastic to the hoop, you want to make sure it is perpendicular to the other side.
The top should face you, and the bottom should be facing the rim.6.
Once the plastic is attached, it is time to start assembling the hoop!
First, take a look at the picture above.
There are two parts: the top and the inside handle.
The handle should have two lines on it, and it should go around the rim, about 1/8 of an inch above the top of the handle.
Now you’re ready to assemble the hoop:1, place the plastic on the floor and attach the inside.
The rubber on the handle should be about 1 1/2 inches wide, but don’t worry about it being exact.
The inside handle should stick out a bit from the plastic surface, so it should feel slightly flat and not rough.2, grab the handles with two hands, and push them back and forth.3, you’ll want to put some kind a grip or rubber grip on the plastic handle to hold it in place.4, you should be able to grab the top with your index finger, and squeeze the handle, or maybe a little bit with your middle finger.5, place your fingers on the back of the rubber grip.6, place them on top of each other to secure the plastic grip.7, once the plastic has been secured, you can now attach the top to the bottom.
You can attach it using a small clamp, as long as it is on the rim of the ball.8, there are a couple of ways to attach it to the ball, depending on what hoop you want.
If your hoop has a rim, you may want to attach a metal handle to the top instead.
The tip: if you’re trying to get a quick dunk, don’t try to dunk with it.
That can result in the ball falling straight into the water, so be careful.
If that’s your goal, a basketball with a handle can also help you do that.9, the plastic should be pretty tight.
You should be trying to fit the hoop under the ball so that it can stay firmly in place, but if you are trying to dunk without the ball attached, you might want to try tightening it a little more.
You can get a few different hoops out there.
Here are a few we recommend for basketball:1) Small hoops: they’re cheap and easy to make.
They’re just about 2 inches wide.
They have a handle and a rim.2) Medium hoops: these are a bit more expensive.
They are 2 inches wider.
They can be made with a more durable metal, and they usually come with a rubber grip that holds them in place while you dunk.3) Large hoops: you’ll need to find one with an inside diameter that’s at least 8 inches.
If possible, you’d like to find a hoop with an 8-inch-wide base.
They cost about $40.The tips: